1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone

Modify Date: 2024-02-18 16:59:42

1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone Structure
1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone structure
Common Name 1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone
CAS Number 86668-63-5 Molecular Weight 286.27900
Density N/A Boiling Point N/A
Molecular Formula C16H14O5 Melting Point 134-136ºC(lit.)
MSDS N/A Flash Point N/A

 Names

Name 1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone
Synonym More Synonyms

 Chemical & Physical Properties

Melting Point 134-136ºC(lit.)
Molecular Formula C16H14O5
Molecular Weight 286.27900
Exact Mass 286.08400
PSA 80.67000
LogP 1.89520

 MSDS

Version 1.2
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product Name1-ACETOXY-8-HYDROXY-1,4,4A,9A-TETRA-
HYDROANTHRAQUINONE, 98%

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Not hazardous according to Directive 67/548/EEC.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
1-ACETOXY-8-HYDROXY-1,4,4A,9A-TETR 73794-49-7 NoneNone
A-HYDROANTHRAQUINONE, 98%
FormulaC16H14O5
Molecular Weight 286,2900 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

ALDRICHwww.molbase.com
EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid inhalation. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed. Store in a cool dry
place. Handle and store under nitrogen.
SPECIAL REQUIREMENTS: Handle under inert gas. Air sensitive.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection is desired, use multi-purpose combination (US) or type
ABEK (EN 14387) respirator cartridges.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

pH N/A
BP/BP RangeN/A
MP/MP Range134,000. - 136,000 °
C.
Flash PointN/A
ALDRICHwww.molbase.com
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Conditions of Instability: Air.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Eye Contact: May cause eye irritation.
Multiple Routes: May be harmful by inhalation, ingestion, or
skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental
regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
ALDRICHwww.molbase.com
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).
COUNTRY SPECIFIC INFORMATION
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2915390090

 Customs

HS Code 2915390090
Summary 2915390090. esters of acetic acid. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:5.5%. General tariff:30.0%

 Synonyms

8-hydroxy-1,3,6-pyrenetrisulfonic acid
C.I. Solvent Green 7
8-hydroxy-1,3,6-trisulfonated pyrene
D And C Green 8
Pyranine concentrated
8-hydroxy-1,3,6-pyrenetrisulfonate
8-hydroxypyrene-1,3,6-trisulfonate
D And C Green No. 8
C.I. Solvent Green 9
Green No. 204
MFCD00010793
Top Suppliers:I want be here

Get all suppliers and price by the below link:

1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone suppliers

1-acetoxy-8-hydroxy-1,4,4a,9a-tetrahydroanthraquinone price

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3