Acetamide,2-amino-N-phenyl

Modify Date: 2025-09-13 18:12:32

Acetamide,2-amino-N-phenyl Structure
Acetamide,2-amino-N-phenyl structure
Common Name Acetamide,2-amino-N-phenyl
CAS Number 555-48-6 Molecular Weight 150.17800
Density 1.203g/cm3 Boiling Point 361.5ºC at 760mmHg
Molecular Formula C8H10N2O Melting Point N/A
MSDS N/A Flash Point 172.4ºC

Summary: 2-Amino-N-phenylethanamine (Aminoacetic anilide, CAS: 555-48-6), with molecular formula C8H10N2O and molecular weight 150.17800. The boiling point is 361.5ºC, density 1.203g/cm³, and molecular weight 150.07900. The PSA polar surface area is 55.12000, and LogP is 1.35710. For research-use only, not for medical or clinical usage.


 Names

This table lists Chinese names, IUPAC names and various aliases of this chemical substance.

Name Aminoacetic anilide
Synonym More Synonyms

 Chemical & Physical Properties

This table shows physicochemical parameters including melting point, boiling point, density, solubility and optical rotation. Missing data is marked as N/A.

Density 1.203g/cm3
Boiling Point 361.5ºC at 760mmHg
Molecular Formula C8H10N2O
Molecular Weight 150.17800
Flash Point 172.4ºC
Exact Mass 150.07900
PSA 55.12000
LogP 1.35710
InChIKey QRKJNCRCYBKANP-UHFFFAOYSA-N
SMILES NCC(=O)Nc1ccccc1

 MSDS

This table provides MSDS information including hazard classification, first‑aid, fire‑fighting, spill handling, operation and storage instructions.

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: 2-Amino-N-phenylacetamide
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

Section3. Composition/information on ingredients.
Ingredient name:2-Amino-N-phenylacetamide
CAS number:555-48-6

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
No data
Melting point:
Flash point:No data
Density:No data
Molecular formula:C8H10N2O
Molecular weight:150.2

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Synthetic Route

This table presents publicly reported synthetic routes, reaction conditions, reactants and product information of the compound.

 Synonyms

This table collects all English aliases, systematic names and CAS‑related synonyms of the compound.

2-aminoacetanilide
Benzokoll
amino-acetanilide
Acetanilide,2-amino
Glycocollanilide
N-Phenyl-2-aminoacetamide
N-Glycylaniline
o-aminoacetanilide
aminoacetoanilide
2-amino-N-phenylacetamide
Glycinanilide
Glycine anilide

 Acetamide,2-amino-N-phenyl | FAQ

This section contains frequently‑asked‑questions about this compound, including basic parameters, properties, storage conditions and corresponding answers.

Q: What is the InChIKey of Aminoacetic anilide?
A: InChIKey of Aminoacetic anilide is QRKJNCRCYBKANP-UHFFFAOYSA-N.
Q: What English synonyms does Aminoacetic anilide have?
A: English synonyms of Aminoacetic anilide: 2-aminoacetanilide, Benzokoll, amino-acetanilide, Acetanilide,2-amino, Glycocollanilide, N-Phenyl-2-aminoacetamide, N-Glycylaniline, o-aminoacetanilide, aminoacetoanilide, 2-amino-N-phenylacetamide, Glycinanilide, Glycine anilide.
Q: What are the downstream products of Aminoacetic anilide?
A: Related downstream products(CAS) of Aminoacetic anilide: 88-74-4;2010-15-3;3106-11-4;2221-13-8.
Q: What is the boiling point of Aminoacetic anilide?
A: Boiling point of Aminoacetic anilide is 361.5ºC at 760mmHg.
Q: What is the CAS number of Aminoacetic anilide?
A: CAS number of Aminoacetic anilide is 555-48-6.
Q: What is the English name of Aminoacetic anilide?
A: The English name of Aminoacetic anilide is Aminoacetic anilide.
Q: What is the LogP of Aminoacetic anilide?
A: LogP of Aminoacetic anilide is 1.35710.
Q: What is the polar surface area (PSA) of Aminoacetic anilide?
A: Polar surface area (PSA) of Aminoacetic anilide is 55.12000.
Q: What is the molecular formula of Aminoacetic anilide?
A: Molecular formula of Aminoacetic anilide is C8H10N2O.
Q: What is the molecular weight of Aminoacetic anilide?
A: Molecular weight of Aminoacetic anilide is 150.17800.

 Acetamide,2-amino-N-phenylfactory

This table lists manufacturers and suppliers of this compound, including vendor names and product supply reference information.

Shanghai Nianxing Industrial Co., Ltd
Dayang Chem (Hangzhou) Co., Ltd.
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.