Hao Wu, Yu Fu, Chunyu Guo, Yanbo Li, Nanzhe Jiang, Chengri Yin
Index: 10.1016/j.biortech.2018.03.133
Full Text: HTML
The microbial fuel cell (MFC) has emerged as a promising technology for wastewater treatment and energy recovery, but the expensive cost of proton exchange membranes (PEMs) is a problem that need to be solved. In this study, a two-chamber MFC based on our self-made PEM sulfonated poly (ether ether ketone) membrane was set up to treat phenol/acetone wastewater and synchronously generate power. The maximum output voltage was 240–250 mV. Using phenol and acetone as substrates, the power generation time in an operation cycle was 289 h. The MFC exhibited good removal performance, with no phenol or acetone detected, respectively, when the phenol concentration was lower than 50 mg/L and the acetone concentration was lower than 100 mg/L. This study provides a cheap and eco-friendly way to treat phenol/acetone wastewater and generate useful energy by MFC technology.
Sustainable green pretreatment approach to biomass-to-energy...
2018-04-12 [10.1016/j.biortech.2018.04.039] |
Adsorption removal of natural organic matters in waters usin...
2018-04-07 [10.1016/j.biortech.2018.04.016] |
Biodegradation of acrylamide by a novel isolate, Cupriavidus...
2018-04-06 [10.1016/j.biortech.2018.04.012] |
Combined bioaugmentation with anaerobic ruminal fungi and fe...
2018-04-03 [10.1016/j.biortech.2018.03.128] |
Biocatalytic strategies for the production of high fructose ...
2018-04-03 [10.1016/j.biortech.2018.03.127] |
Home | MSDS/SDS Database Search | Journals | Product Classification | Biologically Active Compounds | Selling Leads | About Us | Disclaimer
Copyright © 2024 ChemSrc All Rights Reserved