sodium,tetrachloroalumanuide

Modify Date: 2024-01-04 10:30:55

sodium,tetrachloroalumanuide Structure
sodium,tetrachloroalumanuide structure
Common Name sodium,tetrachloroalumanuide
CAS Number 7784-16-9 Molecular Weight 191.78300
Density N/A Boiling Point N/A
Molecular Formula AlCl4Na Melting Point 185ºC
MSDS Chinese USA Flash Point N/A
Symbol GHS05
GHS05
Signal Word Danger

 Names

Name sodium,tetrachloroalumanuide
Synonym More Synonyms

 Chemical & Physical Properties

Melting Point 185ºC
Molecular Formula AlCl4Na
Molecular Weight 191.78300
Exact Mass 189.84700
LogP 2.75800

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Sodium tetrachloroaluminate
CAS-No.: 7784-16-9
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1B)
Serious eye damage (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Reacts violently with water. Causes burns.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal wordDanger
Hazard statement(s)
H314Causes severe skin burns and eye damage.
Precautionary statement(s)
P280Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard information (EU)
EUH014Reacts violently with water.
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R14Reacts violently with water.
R34Causes burns.
S-phrase(s)
S22Do not breathe dust.
S26In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S27Take off immediately all contaminated clothing.
S36/37/39Wear suitable protective clothing, gloves and eye/face protection.
S45In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula: AlCl4Na
Molecular Weight: 191,78 g/mol
ComponentConcentration
Aluminium sodium tetrachloride
CAS-No.7784-16-9-
EC-No.232-050-6

Section4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
Headache, Nausea
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Dry powder
Special hazards arising from the substance or mixture
Hydrogen chloride gas, Sodium oxides, Aluminum oxide
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Do not flush with water. Keep
in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Never allow product to get in contact with water during storage.
Specific end use(s)
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, Flame retardant protective clothing, The type of
protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: powder
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: 185 °C - lit.
point
f) Initial boiling point and no data available
boiling range
g) Flash pointnot applicable
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density2,01 g/cm3 at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
Reacts violently with water.
Conditions to avoid
Exposure to moisture.
Incompatible materials
Strong oxidizing agentsWater, Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. Material is extremely destructive to the tissue of
the mucous membranes and upper respiratory tract.
IngestionMay be harmful if swallowed. Causes burns.
SkinMay be harmful if absorbed through skin. Causes skin burns.
EyesCauses eye burns.
Signs and Symptoms of Exposure
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
Headache, Nausea
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: 3262IMDG: 3262IATA: 3262
UN proper shipping name
ADR/RID: CORROSIVE SOLID, BASIC, INORGANIC, N.O.S. (Aluminium sodium tetrachloride)
IMDG: CORROSIVE SOLID, BASIC, INORGANIC, N.O.S. (Aluminium sodium tetrachloride)
IATA:Corrosive solid, basic, inorganic, n.o.s. (Aluminium sodium tetrachloride)
Transport hazard class(es)
ADR/RID: 8IMDG: 8IATA: 8
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine Pollutant: noIATA: no
Special precautions for user
no data available

Section15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

Section16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

 Safety Information

Symbol GHS05
GHS05
Signal Word Danger
Hazard Statements H314
Supplemental HS Reacts violently with water.
Precautionary Statements P280-P305 + P351 + P338-P310
Personal Protective Equipment Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
Hazard Codes C
Risk Phrases 14-34
Safety Phrases S22-S26-S27-S45-S36-S37-S39
RIDADR UN 3262 8/PG 2
Packaging Group III

 Synthetic Route

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Zhurnal Neorganicheskoi Khimii, , vol. 8, p. 1354 - 1356 Zhurnal Neorganicheskoi Khimii, , vol. 8, p. 2585 - 2588 Na: SVol.6, 6.2.5.9, page 396 - 397

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Ann. Chim. Phys., , vol. 43, p. 5 - 5 Ann. Chim. Phys., , vol. 46, p. 415 - 415 Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences, , vol. 39, p. 321 - 321 Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences, , vol. 40, p. 1296 - 1296 Journal fuer Praktische Chemie (Leipzig), , vol. 63, p. 113 - 113 Journal fuer Praktische Chemie (Leipzig), , vol. 67, p. 492 - 492

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Electrochimica Acta, , vol. 33, p. 1137 - 1142

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Inorganic Chemistry, , vol. 30, p. 981 - 988

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Canadian Journal of Chemistry, , vol. 73, # 4 p. 593 - 598

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Zhurnal Neorganicheskoi Khimii, , vol. 1, # 7 p. 1 Zhurnal Neorganicheskoi Khimii, , vol. 1, p. 1646 - 1657 C. A., , p. 1716 Nb: MVol.B4, 11.13.2, page 268 - 268

~%

sodium,tetrachloroalumanuide Structure

sodium,tetrachl...

CAS#:7784-16-9

Literature: Zhurnal Neorganicheskoi Khimii, , vol. 1, p. 1646 - 1657 C. A., , p. 1716 Ta: MVol.B2, 132, page 302 - 305

 Synonyms

EINECS 232-050-6
sodium aluminum chloride
MFCD00050361
sodium tetrachloroaluminate
tetrachloroalumanuide
ALUMINUM SODIUM CHLORIDE