acid yellow 38

Modify Date: 2024-01-02 11:20:58

acid yellow 38 Structure
acid yellow 38 structure
Common Name acid yellow 38
CAS Number 13390-47-1 Molecular Weight 686.68700
Density N/A Boiling Point N/A
Molecular Formula C28H24N4Na2O8S3 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name acid yellow 38
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula C28H24N4Na2O8S3
Molecular Weight 686.68700
Exact Mass 686.05500
PSA 224.36000
LogP 9.43580

 MSDS

Version 1.2
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameACID YELLOW 38 (C.I. 25135)

2 - Hazards Identification

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
ACID YELLOW 3813390-47-1 236-465-3 None
FormulaC28H26N4O8S3.2Na
Molecular Weight 686,7000 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
ALDRICHwww.molbase.com
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid inhalation. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed. Store in a cool dry
place.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection is desired, use multi-purpose combination (US) or type
ABEK (EN 14387) respirator cartridges.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ALDRICHwww.molbase.com
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides, Sulfur oxides.

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Eye Contact: May cause eye irritation.
Multiple Routes: May be harmful by inhalation, ingestion, or
skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental
regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

COUNTRY SPECIFIC INFORMATION
ALDRICHwww.molbase.com
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Synonyms

Einecs 236-465-3
Milling Yellow O
sodium 2,2-thiobis(5-(4-ethoxyphenylazo)benzenesulphonate
2,2'-Thiobis[5-[(4-ethoxyphenyl)azo]benzenesulfonic acid sodium] salt
2,2'-Thiobis[5-[(4-ethoxyphenyl)azo]benzenesulfonic acid]disodium salt
C.I. Acid Yellow 38